Segmen Tempa pikeun Shantui Komatsu CAT
Peningkatan prosés tempa
Ngaganti tina dua atanapi tilu huntu ka lima huntu ngirangan kajadian leupasna blok huntu. Ngaganti bunderan posisi ka blok posisi ngirangan kasalahan mesin sareng gangguan antara bunderan posisi sareng permukaan pamasangan anu disababkeun ku deformasi perlakuan panas.
Kusabab prosés tempa, permukaan sisi sareng flens tinaruas dina prosés tempa nangtung kedah nahan sudut draf anu tangtu, sareng permukaan mesin tina produk satengah réngsé anu ditempa kedah diolah.
Modél anu tiasa kami sediakan
| SEGMEN | ||||||||
| Modél | OEM | Lapangan | Huntu | Hols | Apertur (mm) | Beurat | Merek | OEM lianna (BERCO) |
| DH08 | 111H-18-00001 | 154 | 3 | 3 | 17.5 | 4.1 | shantui | |
| 111H-18-00002 | 4 | 4 | 17.5 | 5.5 | shantui | |||
| SD13 | 10Y-18-00043 | 190 | 5 | 5 | 19.3 | 10.75 | shantui | |
| DH36 | 1175-18-00009 | 228.6 | 6 | 6 | 26.5 | shantui | ||
| 1175-18-00035 | 5 | 5 | 26.5 | |||||
| SD16, D65, D60, D85ESS-2 | 16Y-18-00014H | 203.2 | 3 | 3 | 23.5 | 8.5 | shantui / komatsu | 14X-27-15112/1,141-27-32410,144-27-51150,615-4149,KM2111,KM162 |
| （16Y-18-00049) | ||||||||
| SD22, D85 | 154-27-12273A | 216 | 5 | 5 | 23.5 | 15 | shantui / komatsu | 155-27-00151,615-4150,KM224 |
| SD32, D155 | 175-27-22325A | 228.6 | 3 | 3 | 26.5 | 12 | shantui / komatsu | 175-27-22325/4 17A-27-11630,KM193,17A-27-41630 |
| SD52, D375 | 185-18-00001 | 280 | 5 | 5 | 28.5 | 33 | shantui / komatsu | 195-27-33110/1,KM1285 |
| SD90, D475 | 1189-18-00001/ | 317.5 | 5 | 5 | 31.5 | 43 | shantui / komatsu | |
| 198-27-42260 | ||||||||
| D50, D41, D58, D53 | 131-27-61710 | 175 | 3 | 3 | 19.5 | 6 | komatsu | 131-27-61710, 131-27-42220, KM788 |
| D5B | 5S0836 | 175 | 3 | 3 | 18 | 5 | Ucing | 6Y5244、CR4408.7P2636 |
| D6D/C/G | 6T4179/6T4179/6P9102 | 202.8 | 5 | 4 | 17.8/20.8 | 11.57 | Ucing | 6Y5012,5S0050,7P2706,CR3330,CR3329,8P5837,8E4365/CR5476,117-1616 |
| D6H/R | 6Y2931/1026677 | 202.8 | 5 | 5 | 17.8 | 11.5 | Ucing | 7G7212,8E9041,7T1697,CR5515,173-0946 |
| D7G/E/F | 8E4675/8E4675/8E4675 | 216 | 5 | 4 | 20.8 | 14.7 | Ucing | 5S0052,3P1039,8P8174,CR3148 |
| D8N/R.D7H/R | 7T9773/6Y2354, | 215.9 | 5 | 7 | 20.8 | 16.4 | Ucing | 6Y3928,CR5050,9W0074 |
| 6Y2354/7T9773 | ||||||||
| D8N/R.D7H/R | 314-5462 | 215.9 | 5 | 5 | 20.8 | 16.4 | Ucing | CR7160 |
| D8K.D8H | 6T6782/6T6782 | 228.6 | 3 | 3 | 24.5 | 12 | Ucing | 2P9510,5S0054,CR3144 |
| D6N.D6M | 6I8077/6I8077 | 190 | 5 | 5 | 18.5 | 9 | Ucing | 6I8077/8,CR5875 |
| D9N | 7T1247 | 240 | 5 | 6 | 24.6 | 23.98 | Ucing | CR4686 |
| D10N | 6T9537 | 260.35 | 5 | 6 | 27.61 | 26.7 | Ucing | CR5047 |
| 832 | 632-7793 | 228.6 | 3 | 5 | 26.5 | 11.63 | Ucing | |
HRC
Kusabab prosés tempa, permukaan sisi sareng flens tina ruas dina prosés tempa tegak kedah nahan sudut draf anu tangtu, sareng permukaan mesin tina produk satengah réngsé anu ditempa kedah diolah.
Bungkusan
